Contractors Grade Silt Fence
(Part Number 14987)
Nearly 70% of all construction jobs that require silt fence do not specify the type of fence that must be used. Save money by using superior quality non-spec contractors grade silt fence:

• Economical 36" or 24" width silt
  fabrics (MISF 180)
• 1-1/2" x 1-1/2" (Nominal) hardwood stakes
• Stakes spaced every 10' (10' centers)
• 11 stakes per 100' fabric
  If you’re stocking a fence with specs other than these for non-spec jobs, your probably paying too much!

D.O.T. Spec Silt Fence
This is currently approved or certified by many state D.O.T.’s and can manufacture D.O.T. silt fence to meet any requirement. D.O.T. specifications vary by state and will consist of any of the following requirements.

• Specified higher quality fabrics in 24", 30", 36", 42" widths
• Specified stake sizes 1-1/2" x 1-1/2" (nominal) 2" x 2" (nominal) etc.
• Specified stake spacing 10', 8', 7', 6', 4' centers
• Mesh backing – some D.O.T. specs require mesh backing

Pre-Pocketed Silt Fence
(Part Number 14974)
Pre-pocketed silt fence provides the highest amount of durability under the harshest weather conditions. With its unique pre-pocketed design, each stake is completely surrounded by silt fence material. This eliminates wind tear away that often occurs in silt fence installations. pre-pocketed silt fence is 36" high MISF 180 fabric, with pockets sewn either 6 feet on center or 8 feet on center. It is available as prefabricated fence with stakes attached in100 feet long rolls or without stakes attached in bulk 500 foot rolls. This unique silt fence is required by several DOTs across the country.

Nominal Oak Stakes
(Part Number 14650) 1-1/2"
(Part Number 14651) 2"
(Part Number 14666) 1"x 2”x 60”
Fence Posts high grade oak stakes have pencil points for easy driving. Use these to assemble your own silt fence, staking hay bales, perimeter markers, plus countless other applications.

MISF 3014 Mesh Backing
(Part Number 3014 MISF)
Oriented polypropylene mesh is ideal for use on supported silt fence requirements. This incredibly strong yet flexible material is an accepted alternative by many state DOT in place of 14 or 16 gauge wire backing. This versatile material is also perfect for erosion control in conjunction with hydroseeding, birdnetting, and training vines.

Burlap Fabric
(Part Number 44004)
(Part Number 44005)
Treated 7 oz. burlap fabric is so versatile and has many different uses in construction, landscaping, and plant nursery. This material is available in both treated (rot-resistant) and untreated rolls of 48" x 100 yd or 48" x 500 yd.